Shadow Garage

↑

Click or drop images here

PNG, JPEG, or SVG — select or drop several at once — or a Silhouette Studio .studio3 file

Silhouette Studio File

Opens a Silhouette Studio 5 file with every sticker separate: drag one to move it, resize or delete it. Export .studio3, next to Print below, saves those changes back into the file.

Paper Type

Color Adjust

Brightness: 0 Pale tints: 0 Contrast: 0 Saturation: 0

Applied to the artwork in the preview, print and SVG export. Inkjet ink is see-through on holographic and clear stock, so pale colors barely show. Pale tints darkens light colors while leaving dark ones mostly alone; Brightness darkens everything.

Paper Size

Offset Margin

Space around artwork: mm

Preserve sharp corners

Best for geometric logos/icons with real right angles. Can look faceted on curvy or text-heavy artwork — leave off for those.

Quantity

Gap between stickers: 4.0 mm

Rotate stickers to fit more

Registration Marks

Add print-and-cut alignment marks

Sheet-only; sticker placement automatically keeps clear of the marks. Standard works on virtually every Silhouette model; four-corner is only for the Cameo Pro MK-II, Cameo 5 Alpha, and Cameo 5 Alpha Plus.

Cutter

Not connected

Speed: 1 Pressure: 1

Load the mat before sending — the Cameo 3 reports "ready" even with no mat, so the app can't check for you. Silhouette Cameo 3 or 4 over USB or Bluetooth · AutoBlade. Cuts the sheet as laid out in Sheet Preview. Test cut is a 10 mm square on scrap (no marks). To check print-and-cut alignment, print the calibration sheet at 100% and run the calibration cut on it. Dry run does everything for the sheet, including the mark scan, but traces the outlines with the blade raised — watch where it goes before cutting.

Diagnostics — raw commands, one per line (<ESC EOT> and <ESC ENQ> for escapes). Replies show below and in the log.

Upload an image to begin

Print cut lines (the downloaded SVG always has them)